Mitsubishi WD-65738 사용자 가이드

다운로드
페이지 40
8
 
1.  Basic Setup and Operation
For assistance call 1(800) 332-2119
 Setting Up Other Inputs
Power on the TV.
1. 
Power on the devices to ensure detection.
2. 
Connect one device to the TV, making note of the 
3. 
TV input jack.
The TV will display the 
New Device Found screen if 
the connection type is detectable.
Highlight the device type in the on-screen list and 
4. 
press 
ENTER.  The name you select here will appear 
in the 
Input Selection menu.
Sample New Device 
Found screen.
Press 
5. 
EXIT to close the New Device Found screen.
Repeat steps 3 through 5 for each additional device 
6. 
you want to add.
About Auto Input Sensing
This TV’s Easy Connect™ Auto Input Sensing 
feature detects most input connections automati-
cally.  Some exceptions are:
A connection on the 
ANT input
TV audio outputs (analog and digital)
An HDMI-equipped device that is powered off.  
Power on the device first to ensure detection.
Ethernet
Auto Input Sensing for Most Devices
When you first connect a device, the TV will:
a.  Detect the connected device and auto-
matically switch to it.
b.  Prompt you to identify the device type.
c.  Repeat these steps for other newly 
detected devices.
Setting Up and Using TV Inputs, continued
Selecting an Input to Watch
Press 
1. 
INPUT.
Sample Input Selection menu, antenna input selected
Press 
2. 
    to highlight an input icon.
Press 
3. 
ENTER to switch to the input.
Tuning to Channels on the Antenna Input
Enter the channel number using the number keys 
on the remote control and press 
ENTER.
For a two-part digital channel, such as 3-1, press 
3 
CANCEL .
Press 
CH   /   to change channels one channel at 
a time.
Press and hold 
CH   /   to speed through chan-
nels.
Press 
LAST   to return to the previous channel.
Use the Fav (Favorites) feature to tune to up to nine 
favorite channels.  See page 14.
Press 
GUIDE to display ChannelView channel listings, 
highlight a channel number, and press 
ENTER to tune.