Sony STR-DA5400ES 사용자 가이드

If you are not using surround back speakers, 
you can use the SURROUND BACK 
SPEAKERS terminals for the front speakers 
for use with a bi-amplifier connection.

Connect the jacks on the Lo (or Hi) side of the 
front speakers to the FRONT SPEAKERS A 
terminals, and connect the jacks on the Hi (or 
Lo) side of the front speakers to the 
SURROUND BACK SPEAKERS terminals. 
Make sure that metal fittings of Hi/Lo attached 
to the speakers have been removed from the 
speakers. Not doing so may cause a 
malfunction of the receiver.

Press AMP.
The receiver can be operated using the 
remote.

Press MENU.
The menu is displayed on the TV screen.

Press 

V/v to select “

Settings,” then 

press  

or 

b.

Press 

V/v to select “Speaker,” then 

press  

or 

b.

Press 

V/v to select “Speaker Pattern,” 

then press 

.

Press 

V/v to select the appropriate 

speaker pattern so that there are no 
surround back speakers.

Press RETURN/EXIT O.

Press 

V/v to select “Sur Back Assign,” 

then press 

.

Press 

V/v to select “BI-AMP,” then 

press .
The same signals output from the FRONT 
SPEAKERS A terminals can be output 
from the SURROUND BACK SPEAKERS 
terminals.

• You cannot use the FRONT SPEAKERS B 

terminals for a bi-amplifier connection.

• When you use the auto calibration function, make 

the bi-amplifier settings before you perform auto 
calibration.

• If you make the bi-amplifier settings, the speaker 

level, balance, and equalizer settings of the 
surround back speakers become invalid, and those 
of the front speakers are used.

• Signals output from the PRE OUT jacks are used 

with the same settings as those of the SPEAKERS 
terminals.

• If the Speaker Pattern is set to the setting that there 

are surround back speakers, you cannot make the 
bi-amplifier settings.

Front speaker 

(R)

Front speaker 

(L)

Hi

Lo

Hi

Lo