Sony STR-DA5400ES 사용자 가이드

You can adjust each speaker manually. You 
can also adjust the speaker levels after the auto 
calibration is completed.

The Speaker settings are only for the current 
“Seating Position.”

You can set the speaker impedance. For 
details, see “8: Setting the speakers” 
(page 46).

x 4

Ω

x 8

Ω

Select “Speaker Pattern” according to the 
speaker system which you are using. You do 
not need to select the speaker pattern after auto 
calibration.

Press 

V/v repeatedly to select 

“Speaker Pattern,” then press 

.

The Speaker Pattern screen appears.

Press 

V/v to select the speaker pattern 

you want, then press 

.

Press RETURN/EXIT O.

You can set the analog downmix settings on or 
off.

x OFF

If there is a center speaker connected, this 
setting is set to “OFF” automatically.

x ON

We recommend you set “Center Mix” to “ON” 
to enjoy digital audio with high quality sound 
when you do not have a center speaker 
connected. Analog downmix works when you 
set “Center Mix” to “ON.” This setting is also 
effective to input signals from the MULTI 
CHANNEL INPUT jacks.

You can make settings for the surround back 
speaker(s).

x OFF

If you have not connected surround back 
speakers, select “OFF.”

x BI-AMP

If you connect front speakers in a bi-amplifier 
configuration, select “BI-AMP” (page 110).

x ZONE2

If you are using the surround back speakers in 
zone 2, select “ZONE2.” When you select 
“ZONE2,” the input to the SUR BACK jacks 
of the MULTI CHANNEL INPUT is invalid 
(page 94).

Set “Sur Back Assign” to “OFF,” then connect the 
surround back speakers to this receiver when you 
want to change the connection from a bi-amplifier 
connection or a zone 2 connection to a surround 
back speakers connection. Re-set up the speakers 
after you connect the surround back speakers. Refer 
to “Auto Calibration” (page 48) or “Manual Setup” 
(page 115).