Sony STR-DA5400ES 사용자 가이드

“BRAVIA” Sync is compatible with a Sony 
TV, Blu-ray Disc/DVD player, AV amplifier, 
etc., that is equipped with the Control for 
HDMI function.
By connecting Sony components that are 
compatible with the “BRAVIA” Sync with a 
HDMI cable (not supplied), operation is 
simplified as below:
• One-Touch Play: When you play back a 

component such as a DVD/Blu-ray Disc 
Player, the receiver and the TV are turned on 
automatically and switch to the appropriate 
HDMI input.

• System Audio Control: While watching TV, 

you can select to output the sound from the 
TV speaker or the speakers connected to the 
receiver.

• System Power Off: When you turn off the 

TV, the receiver and connected components 
are also turned off simultaneously.

Control for HDMI is a mutual control function 
standard used by HDMI CEC (Consumer 
Electronics Control) for HDMI (High-
Definition Multimedia Interface).

• When you connect the receiver to a 

component which is not correspond with 
Sony’s Control for HDMI function.

• When you connect the receiver and 

components using other than HDMI 
connection.

We recommend that you connect the receiver 
to products featuring “BRAVIA” Sync.

Depending on the connected component, the 
Control for HDMI function may not work. See the 
operating instructions of the component.

To use the “BRAVIA” Sync, turn the Control 
for HDMI function on for both the receiver 
and the connected component. The receiver is 
compatible with the “Control for HDMI-Easy 
Setting” function. 

When you connect a Sony TV with the 
“Control for HDMI-Easy Setting” function, 
the Control for HDMI function of the receiver 
can be turned on simultaneously by turning the 
Control for HDMI function of the TV on.

Make sure that the receiver, TV, and 
playback components are connected 
using an HDMI cable (not supplied). 
(The respective components must be 
compatible with the Control for HDMI 
function.)

Turn on the receiver, TV and playback 
components.

Turn the Control for HDMI function of 
the TV on.
The Control for HDMI function of the 
receiver and all the connected components 
are simultaneously turned on. During 
setup, “SCANNING” appears in the 
display window of the receiver, and once 
setting is completed, “COMPLETE” will 
appear. Wait until the setup is complete.

For details on setup of the TV, refer to the 
operating instructions of your TV.