Sony STR-DA6400ES 사용자 설명서

• Only digital input signals are output from the 

digital output jack (for recording).

• HDMI sound cannot be recorded.

You can switch the command mode 
(COMMAND MODE AV 1 or COMMAND 
MODE AV 2) of the receiver and the remote.
Switch the command mode from the initial 
setting to the appropriate setting, if other Sony 
component is operated accidentally by the 
same remote, when you are operating the 
receiver using the remote supplied with the 
receiver.
The command modes of both the receiver and 
the remote are those of the initial setting 
(COMMAND MODE AV 2).
The receiver and the remote, on the contrary, 
should use the same command mode. If the 
command modes of the receiver and the 
remote are different, you cannot use the 
remote to operate the receiver.

When the command mode is set to “AV2,” 
“COMMAND MODE [AV2]” appears on the 
display.
When the command mode is set to “AV1,” 
“COMMAND MODE [AV1]” appears on the 
display.

2CH/A.DIRECT