Sony DSR-1600A 사용자 가이드

다운로드
페이지 73
67
Specifications
Ap
pen
dix
e
s
S-video (DSR-1600A):
30 Hz to 5.0 MHz ±1.0 dB (Y), 
5.75 MHz +0/
−3.0 dB (Y) (TM)
S-video (DSR-1600AP):
25 Hz to 5.0 MHz ±1.0 dB (Y), 
5.5 MHz +1.0/
−2.0 dB (Y), 
5.75 MHz +0/
−3.0 dB (Y) (TM)
Component (DSR-1600A):
30 Hz to 5.0 MHz ±1.0 dB (Y), 
5.75 MHz +0/
−3.0 dB (Y) (TM), 
30 Hz to 1.3 MHz ±1.0 dB (C), 
1.5 MHz +0/
−5.0 dB (C) 
Component (DSR-1600AP):
25 Hz to 5.0 MHz ±1.0 dB (Y), 
5.5 MHz +1.0/
−2.0 dB (Y), 
5.75 MHz +1.0/
−3.0 dB (Y) (TM), 
25 Hz to 1.5 MHz ±1.0 dB (C), 
2.0 MHz +1.0/
−2.0 dB (C)
S/N
Composite output (Y):
53 dB or more
S-video output (Y): 55 dB or more
Component output (Y): 55 dB or more
Y/C delay
30 ns or less
K-factor
2.0% or less (K2T, KPB)
Processor adjustment range
Video level
±3 dB/
−∞ to 3 dB selectable
Chrome level
±3 dB/
−∞ to 3 dB selectable
Setup/Black level
±30 IRE (±210 mV)
Chroma phase
±30°
Y/C delay
±100 ns
System phase
Sync: ±1
 µs
 *
SC: ±180°
* +2
 µs to –3 µs when using a TBC remote control unit
Audio performance
Frequency response
Two-channel (48 kHz) mode:
20 Hz to 20 kHz +0.5 dB/
−1.0 dB
Four-channel (32 kHz) mode:
20 Hz to 14.5 kHz +0.5 dB/
−1.0 dB
Dynamic range More than 90 dB
Distortion (THD + N)
Less than 0.05% (48 kHz)
Input connectors
Analog video inputs
REF. VIDEO IN
BNC type (×2, loop-through)
Black burst
0.286 V (DSR-1600A) or 0.3 V (DSR-
1600AP), 75 
Ω, negative sync
Composite sync
Output connectors
Digital signal outputs
SDI OUT (with optional DSBK-1601 SDI/AES/EBU 
Output Board installed)
BNC type (×2, active-through), Serial 
Digital Interface format (270 Mbps), 
SMPTE 259M/CCIR656-III
DV IN/OUT  6-pin IEEE 1394 connector
Analog video outputs
REF. VIDEO OUT
BNC type ×1
Black burst
0.286 V (DSR-1600A) or 0.3 V (DSR-
1600AP), 75 
Ω, negative sync
Composite sync
VIDEO OUT 1, 2 (SUPER)
BNC type (×2), composite, 1.0 Vp-p, 
75 
Ω, sync negative
COMPONENT VIDEO OUT
BNC type (×3), Y/R
−Y/B−Y
Y: 1.0 Vp-p, 75 
Ω, sync negative
R
−Y: 0.7 Vp-p, 75 Ω (75% color bars 
for DSR-1600A or 100% color bars for 
DSR-1600AP)
B
−Y: 0.7 Vp-p 75 Ω (75% color bars 
for DSR-1600A or 100% color bars for 
DSR-1600AP)
S VIDEO OUT DIN 4-pin
Y: 1.0 Vp-p, 75 
Ω, sync negative
C: 0.286 Vp-p (DSR-1600A) or 
0.3 Vp-p (DSR-1600AP), 75 
Ω (burst 
level)
Analog audio outputs
AUDIO OUT
XLR 3-pin, male (× 4), +4/0/
−3
 *
/
−6 
dBm, 600 
Ω loading, low impedance, 
balanced
AUDIO MONITOR OUT
Phono jack, 
−11 dBu ±1 dBu, 47 kΩ, 
unbalanced
* Selectable on DSR-1600AP only
Digital audio outputs
DIGITAL AUDIO (AES/EBU) OUT (with optional 
DSBK-1601 SDI/AES/EBU Output Board installed)