Dual xnav9525 사용자 가이드

35

Red wire not connected or incorrect voltage Check connections for proper voltage 

(11~16VDC)

Black wire not connected

Check connection to ground

Fuse blown

Replace fuse

No connection to Dual head unit

Check 13 pin cable connections

Confirmation speaker not connected

Check connections at speaker

RCA audio output not connected

Check RCA audio connections 

Voice guidance turned off

Check Preferences menu (see page 31)

Left front speaker not connected (XDV8125)

Select all channels (see page 12) 

Red wire touching chassis ground

Check for pinched wire

Incorrect fuse rating

Use fuse with correct rating

The GPS antenna is not connected

Check GPS antenna connection

The GPS antenna cable is damaged

Check for pinched or cur antenna cable

The GPS signal is blocked (such as inside a 
tunnel or garage)

Make sure the antenna has an unobstructed 
view of the horizon

Occasionally, your system may appear to stop responding or be “locked up”. To reset 
your system, press the 

PWR button on the remote control. Press PWR again to reboot the 

system; operation should return to normal. Resetting your system is similar to restarting 
a computer. If the problem still appears after resetting the unit, please contact technical 
support for further assistance.

Due to ongoing technological advancement of USB storage devices, some USB storage 
devices may not be compatible with the XNAV9525.