Sony dvp-cx995v 매뉴얼

You can enjoy 5.1ch surround sound using 
the internal Dolby Digital, DTS, or Super 
Audio CD Multi decoder of this player. 

This connection will allow you to use the 
Dolby Digital, or DTS decoder function of 
your AV amplifier (receiver).

z

• For correct speaker placement, refer to the 

instructions of the connected components.

• To enhance the sound performance:

–Use high-performance speakers.
–Use front, rear, and center speakers of the same 

size and performance.

–Place the subwoofer between the left and right 

front speakers.

• After you have completed the connection, be sure 

to set “DOLBY DIGITAL” to “DOLBY 
DIGITAL” and “DTS” to “DTS” in Quick Setup 
(page 26). 

• When you connect an amplifier (receiver) that 

conforms to the 96 kHz sampling frequency, set 
“48kHz/96kHz PCM” in “AUDIO SETUP” to 
“96kHz/24bit” (page 81).

• Super Audio CD audio signals are not output from 

the DIGITAL OUT (COAXIAL or OPTICAL)/ 
HDMI OUT jack.

• When you connect the player to an AV amplifier 

(receiver) using an HDMI cord, you will need to 
do one of the following:
–Connect the AV amplifier (receiver) to the TV 

with the HDMI cord.

–Connect the player to the TV with a video cord 

other than HDMI cord (component video cord, S 
VIDEO cord, or audio/video cord).