Sony bdp-s780 매뉴얼
27
Se
tti
tti
n
g
s an
d Adj
d Adj
u
st
m
ent
s
s
DVD Aspect Ratio
Letter Box: Displays a wide picture with
black bands on the top and bottom.
Pan & Scan: Displays a full-height picture on
the entire screen, with trimmed sides.
Cinema Conversion Mode
Auto: Normally select this. The player
automatically detects whether the
material is video-based or film-based,
and switches to the appropriate
conversion method.
material is video-based or film-based,
and switches to the appropriate
conversion method.
Video: The conversion method suited for
video-based material will always be
selected regardless of the material.
selected regardless of the material.
Output Video Format
HDMI: Normally select “Auto.” Select
“Original Resolution” to output the
resolution recorded on the disc. When the
resolution is lower than the SD
resolution, it is scaled up to the SD
resolution.
resolution recorded on the disc. When the
resolution is lower than the SD
resolution, it is scaled up to the SD
resolution.
Component Video: Select the resolution that
suits your TV.
Video: Automatically sets the lowest
resolution.
z
• When connecting the HDMI OUT jack and other
video output jacks at the same time, select
“Component Video.”
“Component Video.”
• If no picture appears when setting “HDMI” or
“Component Video” resolution, try another
resolution setting.
resolution setting.
• When connecting via the COMPONENT VIDEO
OUT jack and “Component Video” is selected,
protected content on BD-ROMs is output only at
480i resolution (page 5).
protected content on BD-ROMs is output only at
480i resolution (page 5).
BD/DVD-ROM 1080/24p Output
Auto: Outputs 1920 × 1080p/24 Hz video
signals only when connecting a 1080/
24p-compatible TV using the HDMI
OUT jack.
24p-compatible TV using the HDMI
OUT jack.
Off: Select this when your TV is not
compatible with 1080/24p video signals.
YCbCr/RGB (HDMI)
Auto: Automatically detects the connected
TV type, and switches to the matching
color setting.
color setting.
YCbCr (4:2:2): Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4): Outputs YCbCr 4:4:4 video
signals.
RGB: Outputs RGB video signals.
HDMI Deep Color Output
Auto: Normally select this.
12bit/10bit: Outputs 12bit/10bit video signals
12bit/10bit: Outputs 12bit/10bit video signals
when the connected TV is compatible
with Deep Color.
with Deep Color.
Off: Select this when the picture is unstable
or colors appear unnatural.
SBM (Super Bit Mapping)
On: Smooths the video signals output from
the HDMI OUT jack.
Off: For distorted video signals or unnatural
color.
Pause Mode
Auto: Normally select this. Dynamic moving
pictures appear without blurring.
Frame: Displays static pictures at high
resolution.