Sony dvp-nc675p 작동 가이드
C:\Documents and Settings\PC3\Desktop\My
Document\3091202121 DVP-NC675P_GB Rev\SOURCE\DVP-
NC675P_GB\01US09ADV1-UC.fm
Document\3091202121 DVP-NC675P_GB Rev\SOURCE\DVP-
NC675P_GB\01US09ADV1-UC.fm
master page=right
DVP-NC675P
3-091-202-12(1)
47
So
und
und
Ad
ju
ju
st
m
ent
s
s
Checking the audio signal
format
format
If you press AUDIO repeatedly during
playback, the format of the current audio
signal (Dolby Digital, DTS, PCM, etc.)
appears as shown below.
playback, the format of the current audio
signal (Dolby Digital, DTS, PCM, etc.)
appears as shown below.
Example:
Dolby Digital 5.1 ch
Example:
Dolby Digital 3 ch
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Center
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Center
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound’s
monaural rear audio signals.
signals or the Dolby Digital sound’s
monaural rear audio signals.
• LFE (Low Frequency Effect) signal
Note
If “DTS” is set to “OFF” in “AUDIO SETUP”
(page 68) the DTS track selection option will not
appear on the screen even if the disc contains DTS
tracks.
(page 68) the DTS track selection option will not
appear on the screen even if the disc contains DTS
tracks.
TV Virtual Surround
Settings
Settings
(TVS)
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
If the player is set up to output the signal from
the DIGITAL OUT (COAXIAL or
OPTICAL) jack, the surround effect will only
heard when “DOLBY DIGITAL” is set to
“D-PCM” in “AUDIO SETUP” (page 69).
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
If the player is set up to output the signal from
the DIGITAL OUT (COAXIAL or
OPTICAL) jack, the surround effect will only
heard when “DOLBY DIGITAL” is set to
“D-PCM” in “AUDIO SETUP” (page 69).
1
Press SUR during playback.
The following display appears.
2
Press SUR repeatedly to select
one of the TVS sounds.
Refer to the following explanations given
for each item.
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
for each item.
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
1:ENGLISH DOLBY DIGITAL
3 / 2 .1
Front (L/R)
+ Center
+ Center
LFE (Low Frequency
Effect)
Effect)
Rear (L/R)
2:SPANISH DOLBY DIGITAL
2 / 1
Front (L/R)
Rear
(Monoral)
TVS DYNAMIC
,
continued