Sony dvp-ns305 사용자 가이드
16
Step 3: TV Hookups
Connect the supplied audio/video cord and power cord (mains lead) in the order (1~3) shown
below. Be sure to connect the power cord (mains lead) last.
below. Be sure to connect the power cord (mains lead) last.
When connecting to a standard 4:3 screen
TV
TV
Depending on the disc, the image may not fit
your TV screen.
If you want to change the aspect ratio, please
refer to page 60.
your TV screen.
If you want to change the aspect ratio, please
refer to page 60.
When connecting to a monaural TV
Use a stereo-mono conversion cord (not
supplied). Connect the LINE OUT (VIDEO)
jack on the player to the TV’s video input
jack, and connect the LINE OUT L/R
(AUDIO) jacks to the TV’s audio input jack.
supplied). Connect the LINE OUT (VIDEO)
jack on the player to the TV’s video input
jack, and connect the LINE OUT L/R
(AUDIO) jacks to the TV’s audio input jack.
To change the colour system
The colour system of the player is set to
NTSC or PAL. If the on-screen display of the
player does not appear on the TV, change the
colour system of the player (PAL or NTSC)
so that a picture appears on your TV. To
change the colour system, hold [/1 down
NTSC or PAL. If the on-screen display of the
player does not appear on the TV, change the
colour system of the player (PAL or NTSC)
so that a picture appears on your TV. To
change the colour system, hold [/1 down
while pressing X on the player. The power
indicator lights up in green and changes to
red. Then release X.
indicator lights up in green and changes to
red. Then release X.
PCM/DTS/MPEG/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL
R-AUDIO-L
VIDEO
DIGITAL OUT
LINE OUT
C
R
C
B
Y
OPTICAL
VIDEO
L
AUDIO
R
INPUT
R-AUDIO-L
VIDEO
LINE OUT
to LINE OUT
L/R (AUDIO)
L/R (AUDIO)
TV
to video input
2
Power source
1
Audio/video cord
(supplied)
3
Power source
CD/DVD Player
l
: Signal flow
to LINE OUT
(VIDEO)
(VIDEO)
to audio input
(yellow)
(white)
(red)