Sony dvp-ns92v 사용자 가이드

• When you set the item to “AUTO,” the language 

may change. The “TRACK SELECTION” setting 
has higher priority than the “AUDIO” settings in 
“LANGUAGE SETUP” (page 73).

• If PCM, DTS, MPEG audio, and Dolby Digital 

sound tracks have the same number of channels, 
the player selects PCM, DTS, MPEG, and Dolby 
Digital audio sound tracks in this order.

◆ MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only)

Switches the Multi-disc Resume setting on or 
off. Resume playback can be stored in 
memory for up to 40 different DVD VIDEOs/
VIDEO CDs (page 29).

If you run Quick Setup, Multi-disc Resume settings 
stored in memory may return to the default settings.

◆ DivX

Displays the registration code for this player. 
For more information, go to 
http://www.divx.com 
on the Internet.

◆ AUDIO (HDMI)

Selects the type of audio signal output from 
the HDMI OUT jack.

A loud noise (or no sound) will be output if you 
connect the player to a TV that is not compatible 
with DOLBY DIGITAL/DTS signals and “AUTO” 
is selected. In this case, select “PCM.”

“AUDIO SETUP” allows you to set the sound 
according to the playback and connection 
conditions.

Select “AUDIO SETUP” in the Setup 
Display. To use the display, see “Using the 
Setup Display” (page 72).
The default settings are underlined.

◆ AUDIO ATT (attenuation)

If the playback sound is distorted, set this 
item to “ON.” The player reduces the audio 
output level.
This function affects the output of the 
following jacks:
– LINE OUT L/R (AUDIO) jacks
– LINE (RGB)-TV jack
– 5.1CH OUTPUT jacks

◆ AUDIO DRC (Dynamic Range Control) 
(DVD VIDEO/DVD-VR mode only)

Makes the sound clear when the volume is 
turned down when playing a DVD that 
conforms to “AUDIO DRC.” 
This function affects the output from the 
following jacks:
– LINE OUT L/R (AUDIO) jacks
– 5.1CH OUTPUT jacks
– LINE (RGB)-TV jack
– DIGITAL OUT (OPTICAL or COAXIAL)/

HDMI  OUT jack only when “DOLBY 
DIGITAL” is set to “D-PCM” (page 78).

ON

Stores the resume setting in 
memory for up to 40 discs.

OFF

Does not store the resume 
setting in memory. Playback 
restarts at the resume point only 
for the current disc in the player.

AUTO

Normally, select this. Outputs 
audio signals according to the 
“DIGITAL OUT” settings 
(page 78).

PCM

Converts Dolby Digital, DTS, 
or 96 kHz/24 bit PCM signals to 
48 kHz/16 bit PCM.

OFF

Normally, select this position.

ON

Select this when the playback sound 
from the speakers is distorted.

STANDARD

Normally select this position.

TV MODE

Makes low sounds clear even if 
you turn the volume down.

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

OFF

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

AUDIO FILTER:

SHARP

DOLBY DIGITAL:
MPEG:

D-PCM

PCM

DTS:

D-PCM

48kHz/96kHz PCM:

48kHz/16bit

,