Sony rdr-gx315 사용자 가이드
23
H
ook
ups
and
Se
tti
tti
n
gs
7
Select whether or not you have a cable
connection.
connection.
If you use an antenna only (no cable TV),
select “Antenna.”
For all other connections, select “Cable.”
select “Antenna.”
For all other connections, select “Cable.”
8
Press ENTER.
The Tuner Preset function automatically starts
searching for all of the receivable channels
and presets them.
searching for all of the receivable channels
and presets them.
To set the channels manually, see page 75.
After the Tuner Preset is finished, the setup
display for selecting the picture size of the
connected TV appears.
After the Tuner Preset is finished, the setup
display for selecting the picture size of the
connected TV appears.
9
Select the setting that matches your TV
type.
type.
“4:3 Letter Box”: For standard TVs.
Displays “wide screen” pictures with bands
on the upper and lower sections of the screen.
“4:3 Pan Scan”: For standard TVs.
Automatically displays “wide screen”
pictures on the entire screen and cuts off the
sections that do not fit.
“16:9”: For wide-screen TVs or standard TVs
with a wide screen mode.
For details, see “Video Settings (Video)” on
page 76.
Displays “wide screen” pictures with bands
on the upper and lower sections of the screen.
“4:3 Pan Scan”: For standard TVs.
Automatically displays “wide screen”
pictures on the entire screen and cuts off the
sections that do not fit.
“16:9”: For wide-screen TVs or standard TVs
with a wide screen mode.
For details, see “Video Settings (Video)” on
page 76.
10
Press ENTER.
The setup display for selecting the type of
Dolby Digital signal appears.
Dolby Digital signal appears.
11
Select the type of Dolby Digital signal you
want to send to your amplifier (receiver).
want to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
Digital decoder, select “Dolby Digital.”
Otherwise, select “D-PCM.”
Digital decoder, select “Dolby Digital.”
Otherwise, select “D-PCM.”
12
Press ENTER.
The setup display for selecting the type of
DTS signal appears.
DTS signal appears.
13
Select whether or not you want to send a
DTS signal to your amplifier (receiver),
and press ENTER.
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amplifier (receiver) has a DTS
decoder, select “On.” Otherwise, select “Off.”
decoder, select “On.” Otherwise, select “Off.”
Select the way in which you will receive
channels.
Antenna
Cable
Easy Setup
No Disc
Searching for receivable channels. 25
Please wait.
Easy Setup
No Disc
16 : 9
4 : 3 Letter Box
4 : 3 Pan Scan
Easy Setup
Select your TV screen type.
10:10 AM
No Disc
D-PCM
Dolby Digital
Easy Setup
Dolby Digital
10:10 AM
No Disc
On
Off
Easy Setup
DTS
10:10 AM
No Disc
,continued