Thermador pa48ghsh 사용자 매뉴얼

English 3

READ AND SAVE THESE INSTRUCTIONS

IN CASE OF AN ELECTRICAL FAILURE

If for any reason a gas control knob is turned ON 
and there is no electrical power to operate the 
electronic igniters on the range's cooktop 
burners, turn OFF the gas control knob and wait 
5 minutes for the gas to dissipate before lighting 
the burner manually.

To light the burners manually, carefully hold a 
lighted match to the burner ports and turn the 

gas control knob to 

.

During a power failure, 

you can use the standard cooktop burners, but 
each must be lit with a match.

DO NOT attempt to light the two left burners 
manually. These burners are equipped with the 

ExtraLow

®

 feature and cannot be lit manually.

•

ANSI Z21.1 for Household Gas Appliances

•

UL858 for Household Electric Ranges

•

CAN/CSA-22.2 No. 61-08 for Household Cooking 
Ranges

•

CAN/CGA 1.1-M81 Domestic Gas Ranges

Check your local building codes for the proper method of 
installation. In the absence of local codes, this unit should 
be installed in accordance with the National Fuel Gas Code 
No. Z223.1 current issue and the National Electrical Code 
ANSI/NFPA No. 70 current issue or the Can - B149 
Installation Codes for Gas Burning Appliances and C22.1 
Canadian Electrical Code Part 1.

It is the responsibility of the owner and the installer to 
determine if additional requirements and/or standards 
apply to specific installations.