Siemens a580ip 빠른 설정 가이드
A580 IP KBA / USA EN / A31008-M2013-R301-1-6043 / configuration_6pg.fm / 12.2.09
Ve
rs
ion 4,
16
.09.
2005
12
Saving VoIP access data
Precondition for the following steps:
Before being able to use VoIP for making/receiving calls, you will need to provision and
activate a VoIP account.
activate a VoIP account.
>
Set up a VoIP account with a VoIP provider.
>
Have the VoIP account information you received from your VoIP provider in hand.
You will need:
>
Your registration name (login ID), your password and, if applicable (provider-dependent),
a user name (often this is your VoIP phone number).
a user name (often this is your VoIP phone number).
*
Starting the configuration process
Instead of using the following procedure, you can also enter the VoIP access data using your
PC (steps
PC (steps
to
)
:
>
Launch the Web browser on your PC.
>
Enter the URL http://www.Gigaset-config.com in the address field of the Web browser
and press the Return key.
and press the Return key.
You are connected to your base station's Web configurator. You can find a description of the
Web configurator in the user guide on the enclosed CD.
Web configurator in the user guide on the enclosed CD.
* Automatic configuration:
If your provider supports "automatic configuration", you will receive an "auto-configuration code" instead
If your provider supports "automatic configuration", you will receive an "auto-configuration code" instead
of an authentication name and password.
VoIP configuration with an auto-configuration code is described in the user guide on the enclosed CD.
VoIP configuration with an auto-configuration code is described in the user guide on the enclosed CD.
After configuration, please proceed as described in section
.
When your handset is sufficiently charged
(approx. 20 minutes after you have placed it in the
charging cradle), the Message key
(approx. 20 minutes after you have placed it in the
charging cradle), the Message key
f
on
the handset flashes.
>
Press the Message key
f
on the handset.
8
11
12
8