Siemens a580ip 빠른 설정 가이드
A580 IP KBA / USA EN / A31008-M2013-R301-1-6043 / install_3pg.fm / 12.2.09
Ve
rs
ion 4,
16
.09.
2005
9
Connecting the base station
Connecting the base station with a router (Internet)
Connecting the PC to the router (optional)
You can change the settings on the phone's base station using a PC connected to your phone
via the router.
via the router.
>
Connect a PC to a open LAN port on your router.
Connect one side of the Ethernet cable
into the LAN port on the side of the
base station.
into the LAN port on the side of the
base station.
Insert the other side of the Ethernet
cable into a open LAN port on your
router.
cable into a open LAN port on your
router.
Use the Ethernet cable supplied.
As soon as the cable connecting the phone and router
is plugged in and the router is switched on, the button
lights up on the front of the base station
(Paging button).
is plugged in and the router is switched on, the button
lights up on the front of the base station
(Paging button).
>
The procedures in steps
to
require that your phone is automatically assigned an
IP address by the router (i.e. DHCP is enabled on router and phone).
Exception: (e.g. if DHCP is not enabled on the router) you will have to assign a static IP
address to the base station for LAN access. You must enter this IP address on the handset
before carrying out the following steps. Further information can be found in the user
guide on the enclosed CD.
The following handset menu can be used to make the entry:
Exception: (e.g. if DHCP is not enabled on the router) you will have to assign a static IP
address to the base station for LAN access. You must enter this IP address on the handset
before carrying out the following steps. Further information can be found in the user
guide on the enclosed CD.
The following handset menu can be used to make the entry:
§Menu§
¢
m
Settings
¢
Base
¢
Local Network
¢
enter system PIN (default PIN is 0000)
5
A
B
A
B
6
7
11