Siemens a580ip 사용자 가이드

Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 28.04.2009

Ve

rs

ion 8,

 03

.09

.200

8

The date and time are shown in the idle display of registered handsets. They are 

important, for example, for stating the correct time in the Calls list and for the 

"alarm clock" function. 
There are two methods for updating the time and date on your base station: 

manually with one of the registered handsets (

) or automatically by 

synchronization with a time server on the Internet.
Activate/deactivate synchronization with a time server as follows:

¤

Open the following Web page: 

 

¢

. 

¤

In the 

 field select 

 to 

activate synchronization between base station and a time server. If you 

select 

 the base station will not adopt time settings from a time server. 

In this case set the time and date manually using a handset. 

¤

The 

 field shows the last time the base sta-

tion compared the time and date settings with a time server. 

¤

In the 

 field, enter the Internet address or name of the time server 

from which the base station should adopt its time and date settings (maxi-

mum 74 characters). The time server "europe.pool.ntp.org" is set as default 

on the base station. You can overwrite the setting. 

¤

From the 

 list, select the country in which your base station is being 

operated. 

¤

The 

 field shows the valid time zone for the 

. It shows the 

deviation between local time (not daylight saving time) and Greenwich 

Mean Time (GMT).
If a country is divided into various time zones, they will all appear in the list. 

Select the appropriate 

 for the base station from the list. 

¤

The 

 field is displayed if your 

time zone differentiates between daylight saving time and standard time. 
Select 

 to change the time automatically to daylight saving time or stand-

ard time when daylight saving time begins and ends respectively. 
Select 

if you do not want to change to daylight saving time. 

Please note: If the date and time are updated by a time server that automat-

ically switches between daylight saving time and standard time, you must 

always select 

 here. 

¤

Select the 

 button to save the settings in your phone. 

Once you have activated synchronization, the time and date will be compared 

with a time server as soon as an Internet connection is established. 

Synchronization will usually occur once a day (at night) if synchronization is 

activated. Any additional synchronization will take place only after each new 

system start of the base station (e.g. after a firmware update or a power cut). 
If you register a new handset on your base station it will assume the time and 

date of the base station without any additional synchronization with the time 

server.