Siemens sl785 사용자 가이드
58
Connecting the base station to the PABX
Gigaset SL785 / USA en / A31008-M2009-R301-4-6019 / pabx.fm / 14.02.2011
V
e
rsion 4, 16.0
9
.2005
Connecting the base
station to the PABX
station to the PABX
The following settings are only necessary
when your PABX requires them; see the PABX
user guide.
when your PABX requires them; see the PABX
user guide.
Dialing modes and setting
Flash Duration
Flash Duration
The current setting is indicated by
Ø
.
Changing the dialing mode
The following dialing modes can be
selected:
selected:
u
Touch-tone dialing (DTMF)
u
Pulse dialing
v
¢
Ï
¢
Telephony
¢
Dialing
Mode
s
s
Select dialing mode and press
§Select§
(
Ø
= selected).
Setting Flash Duration
Your phone is preset at the factory for oper-
ation on the main connection. For operation
on a PABX, you may have to change this
value. Please refer to the user guide for your
PABX.
v
ation on the main connection. For operation
on a PABX, you may have to change this
value. Please refer to the user guide for your
PABX.
v
¢
Ï
¢
Telephony
¢
Flash
Duration
s
s
Select duration and press
§Select§
.
(
Ø
= set value). Possible values
are: 80 ms, 100 ms, 120 ms, 180
ms, 250 ms, 300 ms, 600 ms, 800
ms.
ms, 250 ms, 300 ms, 600 ms, 800
ms.
Setting pauses
Changing pause after line seizure
You can change the length of the pause
inserted between pressing the Talk key
inserted between pressing the Talk key
c
and sending the number.
v
v
Open the main menu.
*#Q5#
L
Press keys.
~
Enter digit for the pause length
(1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.)
and press
(1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.)
and press
§OK§
.
Changing the pause after the Flash
key
key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5#
2
Press keys.
~
Enter a digit for the length of the
pause (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and press
pause (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and press
§OK§
.
Switching temporarily to
touch-tone dialing (DTMF)
touch-tone dialing (DTMF)
If your PABX still operates with pulse dialing
(DP), but you need touch-tone dialing
(DTMF) for a connection (e.g., to listen to the
network mailbox), you must switch to touch-
tone dialing for the call.
(DP), but you need touch-tone dialing
(DTMF) for a connection (e.g., to listen to the
network mailbox), you must switch to touch-
tone dialing for the call.
Requirement: You are conducting a call or
have already dialed an external number.
*
have already dialed an external number.
*
Press the Asterisk key.
After the call has ended, pulse dialing is
automatically reactivated.
automatically reactivated.