Siemens 8800 사용자 가이드
Gigaset 8800 Handset
The Gigaset 8800 handset is used exclusively on the Gigaset 8825 system. Up to a total
of eight handsets may be added.
Handset Setup
Before using your handset, follow these steps:
Cordless Handset Registration
The cordless handset that comes with the system is preregistered to the base station.
Additional cordless handsets need to be registered to the base station.
Additional cordless handsets need to be registered to the base station.
1
If the handset is not already on, press PWR key in the
lower right corner of handset.
lower right corner of handset.
2
When Please Register is displayed, press OK.
3
Enter System PIN and press OK (default is 0000).
4
At base station, press MENU.
5
Scroll to System Settings by pressing >FWD key and
then press SELECT.
then press SELECT.
6
Enter System PIN and press SELECT (default is 0000).
7
Scroll to Mobile Registration by pressing >FWD key and then press
SELECT.
SELECT.
8
When Select Intercom Number is displayed on handset, scroll to
number you want to assign, and press OK.
number you want to assign, and press OK.
9
When completed, you will hear a confirmation beep.
See User Manual for additional options.
IMPORTANT: Charge batteries 12 to 14 hours before using the
handset for the first time. WARNING: Use only NiCd or NiMh
AA rechargeable batteries. DO NOT USE ALKALINE, LITHIUM,
OR NON-RECHARGEABLE BATTERIES.
2
Insert batteries
as shown.
3
Place cover on back
of handset and push
gently upward until it
clicks into place.
1
Remove protective
plastic film from
display.
4
Place handset in
charger with
display facing out.
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
Power key
+
+
–
–