Siemens M65 사용자 가이드

 of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)

©

 Siem

ens AG

 2003, C

:\Siem

ens

\D

TP-Satz

\P

ro

du

kte

\SAR_Up

da

te_0508

05\m65_

retail\en\M65K

_St

artup.fm

VAR Langua

ge: en; V

A

R issue

 date: 041104

The battery is not fully charged 

when delivered. Plug charger cable 

into the bottom of the phone, plug 

power supply unit into a mains 

power socket and charge for at least 

. 

Y

Display during charging.

An empty battery is fully charged 

after about 2 hours. Charging is only 

possible within a temperature range 

of +5 °C to 45 °C. If the temperature 

rises/falls 5 °C above/below this, the 

charge symbol flashes a warning. 

The mains voltage specified on the 

power supply unit must not be 

exceeded. 

The operating time depends upon 

the respective conditions of use. 

Extreme temperatures considerably 

reduce the phone’s standby time. 

Avoid placing the phone in the sun 

or on a heater.

Talktime: 100 to 330 minutes

Standby time: 60 to 300 hours

If the battery has been discharged 

fully, the charge icon is not immedi-

ately visible when the power supply 

is plugged in. It will appear after up 

to two hours. In this case the battery 

is fully charged after 3 to 4 hours.
Only use the plug-in power supply unit 

Charge level display during opera-

tion (empty-full):

V

 

W

 

X

 

A beep sounds when the battery is 

nearly empty. The charge level of the 

battery is only displayed correctly 

after an uninterrupted charging/dis-

charging cycle. You should therefore 

 

and where possible not finish the 

Additional information
The power supply unit heats up when used 

for long periods. This is normal and not 

dangerous.
If the battery is removed for longer than 

30 seconds, the clock must be reset.