Allworx 9102 부록 매뉴얼
9112 Template Instructions
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 Allworx Corp. All rights reserved. Allworx is a registered trademark of Allworx Coporation. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: October 10, 2007
Page 1
Instructions
1. Open the attached document "Allworx
®
9112 Phone Label Template"
2. Left mouse click in the cell you want to edit.
3. Type the information to be contained in that cell. You can type one or two lines of text. The text will be left
justified on the vertical axis and center justified on the horizontal axis (meaning if you enter only one line of
text it will be centered to the PFK).
text it will be centered to the PFK).
4. Repeat steps 2 thru 4 for as many cells as you want to enter text for.
5. Print the finished template.
6. Cut out the template by following the inside lines (arcs and notches).
7. Remove the line label cover (clear piece) from your 9112 phone.
8. Place the line label you created into the clear line label cover.
9. Snap the cover with the line label installed back into the phone.