Intel RS2BL080 사용자 설명서
Hardware
Intel® RAID Controller RS2BL080 Technical Product Specification
Revision 1.0
Intel order number E64388-001
16
Pin #
Signal
Description
7
P1V8 1.8V
power
8
BATT_PRSNT Battery
present
9
P3V3_STBY
3.3V auxiliary power
10 GND
Ground
11 GND
Ground
12
P3V3 3.3V
power
13 SCL
I2C
Clock
14 GND
Ground
15 SDA
I2C
Data
16
BBSTATUS
Battery backup status
17 GND
Ground
18
BBSTROBE
Battery Backup Strobe
19 GND
Ground
20
VBB_DDR_MEM DDR/DDRII
Power
2.3.9
PCI Interface
The Intel
®
RAID Controller RS2BL080 must be installed into a standard x8 or larger PCI
Express* slot that complies with the PCI Express* Specification, Revision 2.0. The controller is
PCI Express* 1.0 compatible and is backward-compatible with x8 or larger slots that are wired
with x1, x2, and x4 PCI Express* lanes.
PCI Express* 1.0 compatible and is backward-compatible with x8 or larger slots that are wired
with x1, x2, and x4 PCI Express* lanes.
2.3.10
Jumpers and Connectors
The following figure shows the jumpers and connectors on Intel
®
RAID Controller RS2BL080. A
description for each jumper and connector is provided in the table that follows the figure.
Figure 8 Jumpers and Connectors