Roland PCR-1 사용자 매뉴얼
12
Names of things and what they do
Rear Panel
17 Security Slot (
)
http://www.kensington.com/
18 Input volume
This dual concentric knob adjusts the input level to
input jacks L and R
.
19 Input jacks (PCA Pin Type)
These are input jacks for analog audio signals. You can connect dynamic mics, guitars, or audio
devices. You must set the
devices. You must set the
Input select switch
to the position appropriate for the device you
have connected.
If you connect a guitar or mic only to the L jack or R jack, the signal will be monaural.
If you connect a guitar or mic only to the L jack or R jack, the signal will be monaural.
20 Master output jacks (PCA Pin Type)
These are analog audio output jacks. You can connect them to your external monitor speaker
system.
system.
21 Digital output jack / Headphone jack
* The same jack serves as both the headphone jack and digital output jack.
fig.hint
Optical
These are digital jacks for connecting optical cables. Digital jacks for connecting coaxial cables
are labeled Coaxial.
are labeled Coaxial.
• Use these jacks to output digital audio to a digital audio device such as a MD/DAT.
On the PCR-1, the input from the input jacks cannot be output directly to the Digital output
connector.
connector.
• You can connect a set of headphones to this jack. The headphone jack will output the same
signal as the master output jacks and digital output jacks. Sound will be output from the
master output jacks even if headphones are connected.
master output jacks even if headphones are connected.
22 USB connector
Use this when connecting the PCR-1 to your computer via a USB cable.
fig.rear
18
21
22
19
20
17
PCR-1_e.book 12 ページ ２００４年３月１６日 火曜日 午後２時５５分