Roland PCR-1 사용자 매뉴얼

Use audio functionality

Playing sounds on your computer

Here’s how you can listen to audio playback from your computer from the PCR-1 or
headphones connected to the PCR-1. Play back audio data (e.g., .WAV data).

fig.connect-play

* You will no longer hear sound from the internal speaker of your computer.

* The PCR-1 is not equipped with its own MIDI sound generator. This means that MIDI data from your

computer cannot be played by the PCR-1.

* If the sampling frequency is set to 96 kHz REC, you will not hear the playback sound from your

application .(

➝

USB AUDIO MODE SETTING

(p. 96))

* Some connection cables contain a resistor. Do not use a cable with a built-in resistor to connect with the

PCR-1. Doing so may make the sound extremely weak, or inaudible. Use the cable without a built-in
resistor (eg.,Roland PCS series).

To prevent malfunction and/or damage to speakers or other devices, always turn down the
volume, and turn off the power on all devices before making any connections.

In order to play sounds on your computer from the PCR-1, you will need to first install the
driver and make device settings. (

➝Windows (p. 14) , Macintosh (p. 31)

You must also turn on the PCR-1’s USB Audio functionality. (

➝USB AUDIO ON/OFF (p. 96))

USB cable

OUTPUT

Signal flow

Headphones

Audio cable

External input jacks
(AUX IN, LINE IN)

Stereo set,
Monitor speakers, etc.

PCR-1_e.book 46 ページ２００４年３月１６日　火曜日　午後２時５５分