Roland PCR-1 사용자 매뉴얼

 

Use MIDI functionality

 

■

 

Here’s how you can assign a system exclusive message to a controller. Advanced mode 2 lets 
you assign a single-byte system message (System realtime message, tune request). 
Advanced modes 3 and 4 let you assign any desired message. (Input up to 24 bytes)

Sys Ex. ASSIGN can calculate the checksum automatically, and lets you specify a variable (data) 
range or embed a channel/block number within the message. (

 

In Sys Ex. ASSIGN, the input mode will be HEX mode.

 

fig.edt2

 

Press the 

 

 button.

The display will indicate “EDT”.

 

fig.r-1

 

Slightly move the controller to which you want to assign the system exclusive 
message. In the case of a button, press that button.

The display will indicate the number of the selected controller.

 

Confirm what’s indicated, and press the 

 

 button.

 

fig.se0

 

Press an 

 

 key (

)  on the keyboard enough times 

to get "SE0" to appear in the display. 

 

If you want to select an Advanced mode, press a key from 

 

 to 

 

.

The selected mode will blink in the display.

 

Confirm what’s indicated, and press the 

 

 button.

Then continue with the procedure described in Basic mode or Advanced mode (p. 78).
For some actual examples of settings, refer to 

 

 

Basic mode

0

Sys Ex. message Default range

Input F7

1st byte fixed at F0

Advanced mode 1

1

Sys Ex. message Assignable

Input F7

1st byte fixed at F0

Advanced mode 2

2

Single byte sys-
tem message

–

–

 

 

 

but-

tons are invalid

Advanced mode 3

3

Any desired 
MIDI message

Default range

Specified number of bytes

 

button is 

invalid

Advanced mode 4

4

Any desired 
MIDI message

Assignable

Specified number of bytes

 

button is 

invalid

PCR-1_e.book 77 ページ ２００４年３月１６日　火曜日　午後２時５５分