Roland VP-550 사용자 매뉴얼

56

Model:  

VP-550

Date:  

Feb. 01, 2006

Version:  

1.00

Status 2nd byte 3rd byte
8nH 

kkH vvH

9nH kkH 

00H

n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = Note number:  

00H - 7FH (0 - 127)

vv = Note off  velocity:   00H - 7FH (0 - 127)

Status 2nd byte 3rd byte
9nH kkH 

vvH

n = MIDI channel number: 0H - 2H (ch.1 - ch.3)
kk = Note number:  

00H - 7FH (0 - 127)

vv = Note on velocity:   01H - 7FH (1 - 127)

Status 2nd 

byte 

3rd 

byte

BnH 01H 

vvH

n = MIDI channel number: 0H - 1H (ch.1 - ch.2)
vv = Modulation depth: 00H - 7FH (0 - 127)
* Changes the vibrato depth.

Status 2nd 

byte 

3rd 

byte

BnH 02H 

vvH

n = MIDI channel number: 1H  (ch.2)
vv = Control value: 00H - 7FH  (0 - 127)
* Changes the volume and tone.

Status 2nd byte 3rd byte
BnH 04H 

vvH

n = MIDI channel number: 1H  (ch.2)
vv = Control value: 00H - 7FH  (0 - 127)
* Changes the volume and tone.

Status 2nd byte 3rd byte
BnH 

0BH vvH

n = MIDI channel number: 0H - 1H  (ch.1 - ch.2)
vv = Expression:  

00H - 7FH (0 - 127)

* Changes the volume.

Status 2nd byte 3rd byte
BnH 10H vvH
n = MIDI channel number: 0H - 1H  (ch.1 - ch.2)
vv = Control value:  

00H - 7FH (0 - 127)

* Changes the tone.

Status 2nd 

byte 

3rd 

byte

BnH 10H vvH
n = MIDI channel number: 0H - 1H  (ch.1 - ch.2)
vv = Control value:  

00H - 7FH (0 - 127)

* Changes the pitch.

Status 2nd 

byte 

3rd 

byte

BnH 40H 

vvH

n = MIDI channel number: 0H - 1H (ch.1 - ch.2)
vv = Control value:  

00H - 7FH (0 - 127)

  

0-63 

= 

OFF, 64-127 = ON

* In Vocal Designer, sustains the carrier sound.
* In Ensemble, sustains the sound.

■

●

●

●

❍

❍

❍

❍

❍

❍

❍

Status 2nd 

byte

CnH ppH
n = MIDI channel number: 0H - 2H (ch.1 - ch.3)
pp = Program number: 00H - 7FH (prog.1 - prog.128)
* Switches sounds.

Status 

2nd byte 

3rd byte

EnH 

llH mmH

n = MIDI channel number: 0H - 1H (ch.1 - ch.2)
mm, ll = Pitch Bend value: 00 00H - 40 00H - 7F 7FH
 (-8192 - 0 - +8191)
* Changes the pitch

Status 

2nd byte 

3rd byte

BnH 78H 

00H

n = MIDI channel number: 0H - 2H (ch.1 - ch.3)
*  When this message is received, all notes currently sounding

on the corresponding channel will be turned off .

Status 2nd byte 3rd byte
BnH 79H 

00H

n = MIDI channel number: 0H - 2H (ch.1 - ch.3)
*  When this message is received, the following controllers will 

be set to their reset values.

Controller Reset 

value

Pitch Bend Change +/-0 

(center) 

Modulation 0 

(off 

)

Breath type 0 

(min) 

Foot type 0 

(min) 

Expression  

127 (max)

General purpose controller 1  0 (min) 
General purpose controller 2  0 (min) 
Hold 1 

0 (off  )

Status 2nd byte 3rd byte
BnH 7BH 

00H

n = MIDI channel number: 0H - 2H (ch.1 - ch.3)
*  When All Notes Off  is received, all notes on the corresponding

channel will be turned off . However, if Hold 1 is ON, the sound 
will be continued until these are turned off .

Status 2nd byte 3rd byte
BnH 7CH 

00H

n = MIDI channel number: 0H - 2H (ch.1 - ch.3)
*  The same processing will be carried out as when All Notes Off  

is received.

Status 2nd byte 3rd byte
BnH 7DH 

00H

n = MIDI channel number: 0H - 2H (ch.1 - ch.3)
*  The same processing will be carried out as when All Notes Off  

is received. OMNI ON will not be turned on.

Status 2nd byte 3rd byte
BnH 7EH 

mmH

n = MIDI channel number: 0H - 2H (ch.1 - ch.3)
mm = mono number: 00H - 10H (0 - 16) 
*  The same processing will be carried out as when All Notes Off  

is received. MONO will not be turned on.

Status 2nd byte 3rd byte
BnH 7FH 

00H

n = MIDI channel number: 0H - 2H (ch.1 - ch.3)
*  The same processing will be carried out as when All Notes Off  

is received.

●

●

■

●

●

●

●

●

●

●

Status
FEH

*  When Active Sensing is received, the unit will begin monitor-

ing the intervals of all further messages. While monitoring, 
if the interval between messages exceeds 420 ms, the same
processing will be carried out as when All Sounds Off , All 
Notes Off  and Reset All Controllers are received, and message
interval monitoring will be halted.

Status Data 

byte Status

F0H iiH, ddH, ......, eeH 

F7H

F0H:  

System Exclusive Message Status

ii = ID number:   an ID number (manufacturer ID) to indicate 

the manufacturer whose Exclusive message
this is. Roland’s manufacturer ID is 41H. ID 
numbers 7EH and 7FH are extensions of the 
MIDI standard; Universal Non-realtime Mes-
sages (7EH) and Universal Realtime Messages
(7FH).

dd,..., ee = data:   00H - 7FH (0 - 127)
F7H:  

EOX (End Of Exclusive)

Of the System Exclusive messages received by this device, the
Universal Non-realtime messages.

Status Data 

byte 

Status

F0H 7EH, dev, 06H, 01H 

F7H

Byte Explanation
F0H Exclusive status
7EH 

ID number (Universal Non-realtime Message) 

dev 

Device ID (dev:  10H, 7FH)

06H Sub 

ID#1 

(General Information)

01H 

Sub ID#2 (Identity Request) 

F7H EOX 

(End Of Exclusive) 

*  When this message is received, Identity Reply message (p. 57)

will be transmitted.

Status 

2nd byte 

3rd byte

8nH 

kkH vvH

n = MIDI channel number: 0H - 2H (ch.1 - ch.3)
kk = Note number: 00H - 7FH (0 - 127)
vv = Note off  velocity: 00H - 7FH (0 - 127)

Status 

2nd byte 

3rd byte

9nH 

kkH vvH

n = MIDI channel number: 0H - 2H (ch.1 - ch.3)
kk = Note number: 00H - 7FH (0 - 127)
vv = Note on velocity: 01H - 7FH (1 - 127) 

Status 2nd byte 3rd byte
BnH 

01H vvH

n = MIDI channel number: 0H - 1H (ch.1 - ch.2)
vv = Modulation depth: 00H - 7FH (0 - 127) 
* Transmitted when the Modulation lever is operated.

■

●

■

■

❍

■

●

●

●

❍