Motorola i50sx 사용자 매뉴얼
CAR KIT OWNER’S MANUAL
5
•
Do not install the components in locations where they might cause
interference to the operation of the vehicle controls.
interference to the operation of the vehicle controls.
•
If it is necessary to penetrate the firewall, check opposite side for
cable clearance before drilling and use a grommet to protect the
cable where it passes through.
cable clearance before drilling and use a grommet to protect the
cable where it passes through.
Recommended Tools
The following tools are recommended for proper installation of your Car
Kit.
•
Kit.
•
Portable Drill
•
Hammer
•
Center Punch
•
Phillips #2 Screwdriver
Junction Box Installation
In most vehicles, the best location for mounting the junction box is just
under the dash, or under the front seat. It must be protected from dirt and
moisture, and must be afforded adequate space for cooling. There must
also be sufficient space to allow for the connection of accessories.
under the dash, or under the front seat. It must be protected from dirt and
moisture, and must be afforded adequate space for cooling. There must
also be sufficient space to allow for the connection of accessories.
Figure 2. Junction Box - Accessories Connection Diagram
to Phone Cradle
to optional Palm
Mic
Mic
to External
PTT
PTT
to External
Speaker
Speaker
to External
Microphone
Microphone
to Power
Cable
Cable
NTN9477A_Condor Car Kit.book Page 5 Monday, January 14, 2002 12:27 PM