Rollei dcx310 사용자 가이드

6

GETTING STARTED

The Power Button is located on the top of the camera.(

fig.1.1)

1.  Press the (      ) Power Button to turn the camera on. 

• The lens cover will open, and the lens will extend out automatically to the

wide-angle position.

• The LCD will turn on automatically.

2. To turn the camera off, press the (      ) Power Button.

Note:
To extend battery life, the LCD will turn off after 1 minute of inactivity. Press the (      ) button, the Shutter
Button or the Power Button to reactivate the LCD. The camera will automatically power off after 2 minutes
of inactivity, press the Power Button to power the camera back on.

There are 5 battery levels that are displayed on the LCD.

Note:
• The camera's battery level indicator may not accurately reflect the state of a rechargeable battery even

the chargeable batteries have been fully recharged. 

• To extend battery life, the camera will automatically power off after 2 minutes of inactivity.  To change this

setting, please refer to p.33.

• For better performance, please use NiMH rechargeable batteries.
• Remove the batteries from the camera if they will not be used for an extended period of time to prevent

corrosion or battery leaks.

fig.1.1

Batteries are full

and ready to use.

3/4 battery

capacity remains.

1/2 battery

capacity remains.

1/4 battery

capacity remains.

Batteries are low

need to be

replaced soon.

Batteries are

empty, blinking

red and need to

be replaced.