Motorola md451 사용자 가이드
13
Ge
tti
tti
ng Started
Setting Up the Charging Bases
If you have expansion handsets, they do not need to
be plugged into a phone line. Simply plug the power
cord into the back of the charging base and into an
outlet wherever you want to place the handset.
be plugged into a phone line. Simply plug the power
cord into the back of the charging base and into an
outlet wherever you want to place the handset.
Installing Batteries in the Handsets
Important: Before installing or handling batteries,
read the Battery Safety Instructions on page 8.
read the Battery Safety Instructions on page 8.
1. Remove the battery cover by pressing on the
recess and sliding down and off the handset.
2. Plug the connector into the receptacle.
3. Insert the battery into the compartment.
4. Slide and snap the battery cover back into place.
3. Insert the battery into the compartment.
4. Slide and snap the battery cover back into place.
Charging the Handsets
Place the handset in the base station or charging
base. The charging LED is solid red when the
handset is charging.
base. The charging LED is solid red when the
handset is charging.
Black
Red
MD450_EN_CA-Only.book Page 13 Friday, July 16, 2004 12:12 AM