AASTRA 480i 사용자 설명서
Sample Configuration Files
41-001129-00 Rev 09, Release 1.4.1
D-35
Sample Configuration Files
Appendix D
# proxy. Set to 0 to enable SRV
# lookups
# lookups
sip registrar ip: aastra.com # IP address or FQDN of registrar
sip registrar port: 0 # as proxy port, but for the registrar
sip registration period: 3600 # registration period in seconds
sip registrar port: 0 # as proxy port, but for the registrar
sip registration period: 3600 # registration period in seconds
#-------------------------------------------------------------------
# Programmable Key Settings
# =========================
# =========================
# Programmable keys can be set either server wide or unique to each phone.
# Setting programmable keys as line/call appearances should be done in the
# "<mac>.cfg" file, since these are unique to each phone.
# Setting programmable keys as line/call appearances should be done in the
# "<mac>.cfg" file, since these are unique to each phone.
# Notes:
#
# There are a maximum of 7 programmable keys that can be configured
# on the 9133i phone, and only 2 on the 9112i phone. These can be set
# up through either of the 2 configuration files, depending on
# whether this is to be server wide ("aastra.cfg") or phone specific
# ("<mac>.cfg"). Each prgkey needs to be numbered from 1 - 7 (or 1 -
# 2 on the 9112i), for example "prgkey2 type: speeddial".
# Programmable keys can be set up as speeddials or as additional
# call/line appearances or as feature keys and have a type, value and
# line associated with it as seen here in the default programmable
# settings.
#
# There are a maximum of 7 programmable keys that can be configured
# on the 9133i phone, and only 2 on the 9112i phone. These can be set
# up through either of the 2 configuration files, depending on
# whether this is to be server wide ("aastra.cfg") or phone specific
# ("<mac>.cfg"). Each prgkey needs to be numbered from 1 - 7 (or 1 -
# 2 on the 9112i), for example "prgkey2 type: speeddial".
# Programmable keys can be set up as speeddials or as additional
# call/line appearances or as feature keys and have a type, value and
# line associated with it as seen here in the default programmable
# settings.
# PRGKEY TYPES: "speeddial", "blf", "list", "dnd"
# PRGKEY VALUE: If prgkey type is a speeddial, any DTMFs (from
# 0 - 9, *, "#") or a comma (,) for 500ms pause and
# 'E' for On-hook can be set for the value.
# If prgkey type is blf it is the extension you want
# to monitor.
# PRGKEY VALUE: If prgkey type is a speeddial, any DTMFs (from
# 0 - 9, *, "#") or a comma (,) for 500ms pause and
# 'E' for On-hook can be set for the value.
# If prgkey type is blf it is the extension you want
# to monitor.
# Speed Dials
prgkey1 type: speeddial
prgkey1 value: *8
prgkey1 type: speeddial
prgkey1 value: *8