AASTRA 9480i 사용자 가이드

Model 9480i CT IP Phone User Guide

 

203

The following are guidelines to use when programming the feature keys on the handset:

•

All handsets paired with the same Base Station have the same programmed functions since the 
web interface applies the functions to all the handsets paired with that base.

•

A newly registered handset or handset that was out-of-range during the programming needs to 
perform an "off-hook and on-hook" sequence in order for the newly programmed function to 
be broadcast to the affected handsets. Simply press the 

v key from the idle state to go 

off-hook. Then, press the 

y

 

key to go back on-hook.

•

Duplicate functions can exist in the feature key as there is no filtering or duplicate checking 
done on the handset or the base.

•

If no line keys are programmed for the feature key, the handset is restricted to intercom calls 
only.

•

If all 15 Handset Keys have been programmed to "None", the user is presented with a List 
empty message when the feature key is pressed.

•

For security reasons, the user has 180 seconds (3 minutes) to complete the programming. 
Otherwise, the phone displays the following error: 
** Error **: Session expired, Please reload page.

•

For security reasons, the user must submit the page from the same browser that was used to 
load the page. If the user tries to submit the page from any other IP address, the following error 
displays: ** Error ** Session invalid. Different Client IP Addresses. — Please reload page.

Indicates the key is configured for either Private or Public use. You can 
toggle between Private and Public as required. Default is Private.

Note: “Private” is the default setting on the Handset. The “Private/
Public” option is available only when multiple handsets are paired with 
the same base.

In “Public” mode, all handsets paired with the same base can share 
calls. In this mode, a triangle indicator illuminates in front of the Public 
label in the feature list on the Handset. You can toggle between Public 
and Private as required. The Base Unit displays “Private” on a softkey 
allowing you to toggle between Public and Private. 

In “Private” mode set on a specific Handset, all calls are made private 
to that Handset only. No calls are shared.

Indicates the key is set to generate a flash event when it is pressed on 
the 9480i CT. The IP phone generates flash events only when a call is 
connected and there is an active RTP stream (for example, when the 
call is not on hold).

List empty

Use web page to

configure