Enterasys mrx 설치 설명서
![Enterasys](https://files.manualsbrain.com/attachments/0d61cd0d9a60e36f1a6c1364af6a0a9788bcf75b/common/fit/150/50/0c43aa9c6913c8f0c68912f62e6506afc95280a8d9a1fc71e52e7f54646e/brand_logo.jpeg)
Page 3-2
INSTALLATION
3.2 ATTACHING THE STRAIN RELIEF BRACKET
Attach the strain relief bracket to the front of the HUB as follows:
1.
Locate the strain relief bracket and four 8-32 x 3/8" screws from
the HUB installation kit.
the HUB installation kit.
2.
Attach the strain relief bracket to the rear of the HUB as shown
in Figure 3-1.
in Figure 3-1.
Figure 3-1. Attaching the Strain Relief
3.3 INSTALLING THE HUB
The HUB can be rack-mounted in a 19-inch rack, wall mounted or
free-standing on any horizontal surface (i.e., shelf or desk, etc.).
Select one of the following subsections and perform the steps that are
applicable for your installation:
free-standing on any horizontal surface (i.e., shelf or desk, etc.).
Select one of the following subsections and perform the steps that are
applicable for your installation:
3.3.1 Rack Mounting the HUB
3.3.2 Wall Mounting the HUB
3.3.3 Free-Standing Installation
3.3.2 Wall Mounting the HUB
3.3.3 Free-Standing Installation