TP-LINK TD-8816 사용자 가이드

 

 

4

devices. 

¾

  LINE: Through the port, you can connect the Router with the telephone. 

¾

  The Product should not be located where it will be exposed to moisture or excessive heat. 

¾

  Place the Router in a location where it can be connected to the various devices as well as to 

a power source. 

¾

  Make sure the cables and power cord are placed safely out of the way so they do not create a 

tripping hazard. 

¾

  The Router can be placed on a shelf or desktop. 

Before installing the device, please make sure your broadband service provided by your ISP is 

available. If there is any problem, please contact your ISP. You need to connect the device to the 

phone jack, the power outlet, and your computer or network. Before cable connection, cut off the 

power supply and keep your hands dry. You can follow the steps below to install it. 

Step 1:  Connect the ADSL Line. 

Method one: Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on 

the rear panel of TD-8816, and insert the other end into the wall socket. 

Method two：You can use a separate splitter. External splitter can divide the data and 

voice, and then you can access the Internet and make calls at the same time. The 

external splitter has three ports: 

•

  LINE: Connect to the wall jack 

•

  PHONE: Connect to the phone sets 

•

  MODEM: Connect to the ADSL LINE port of TD-8816 

Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on the rear panel 
of TD-8816. Connect the other end to the MODEM port of the external splitter. 

Step 2:  Connect the Ethernet cable. Attach one end of a network cable to your computer’s 

Ethernet port or a regular hub/switch port, and the other end to the LAN port on the 

TD-8816. 

Step 3:  Attach the power adapter. Connect the AC power adapter to the POWER connector on 

the rear of the device and plug in the adapter to a wall outlet or power extension. 

Step 4:  Turn on the TD-8816 and power on the computers and LAN devices.