Sony VPL-CX70 사용자 가이드
GB
38
The INSTALL SETTING Menu
The INSTALL SETTING Menu
The INSTALL SETTING menu is used for changing the settings of the projector.
Setting items
Functions
Initial setting
value
value
Tilt...
Adjusts the position (height) of the projected picture.
V Keystone
Corrects the trapezoidal distortion caused by the projection
angle. Select “Auto” for automatic correction, or “Manual”
for manual correction using the
angle. Select “Auto” for automatic correction, or “Manual”
for manual correction using the
</M/,/m key on the
Remote Commander.
When the bottom of the trapezoid is longer than the top
When the bottom of the trapezoid is longer than the top
: Sets a lower value.
When the top of the trapezoid is longer than the bottom
: Sets a higher value.
Auto
Side Shot
Corrects the horizontal trapezoidal distortion of the picture
using the
using the
</M/,/m key on the Remote Commander.
When the right side is longer than the left side (
)
Set to a higher value (+ direction).
When the left side is longer than the right side (
When the left side is longer than the right side (
)
Set to a lower value (– direction).
Set the adjustment level to “0” if you want to adjust the
picture more widely using “V Keystone” only.
Set the adjustment level to “0” if you want to adjust the
picture more widely using “V Keystone” only.
0
Auto Focus
When set to "Off," the focus adjustment does not work
automatically when the projector is turned on.
automatically when the projector is turned on.
On
Image Flip
Flips the image on the screen horizontally and/or vertically.
• Off: The image does not flip.
• HV: Flips the image horizontally and vertically.
• H: Flips the image horizontally.
• V: Flips the image vertically.
• Off: The image does not flip.
• HV: Flips the image horizontally and vertically.
• H: Flips the image horizontally.
• V: Flips the image vertically.
Off
Background
Select the background color of the screen when no signal is
input to the projector. Select “Black” or “Blue.”
Normally, set to “Blue.”
input to the projector. Select “Black” or “Blue.”
Normally, set to “Blue.”
Blue
Test Pattern
When set to “On,” a test pattern is displayed on the screen
during the “Lens Zoom” adjustment, “Lens Focus,” “Side
Shot” or “V Keystone.”
during the “Lens Zoom” adjustment, “Lens Focus,” “Side
Shot” or “V Keystone.”
Off
INSTALL SETTING
Input-A
T i l t . . .
V Key s t o n e :
V Key s t o n e :
Au t o
S i d e S h o t :
O n
Au t o F o c u s :
O n
I m a g e F l i p :
O f f
B a ck g ro u n d : B l u e
Te s t Pa t t e r n :
Te s t Pa t t e r n :
O f f
L a m p M o d e :
S t a n d a rd
L e n s C o n t ro l :
O n
H i g h A l t i t u d e M o d e : O f f
S e c u r i t y L o ck :
S e c u r i t y L o ck :
O f f