iOptron G-MC90 빠른 설정 가이드
iOptron Corp. | 6F Gill Street | Woburn, MA 01801 USA | (781) 569‐0200 | Toll Free (866) 399‐4587 | www.iOptron.com
Step 6.
Plug in power plug and hand controller.
Plug in power plug and hand controller.
Step 7.
Turn on and wait for controller lights to come on.
For SmartStar™G users (with GPS) wait for controller
to say “G_OK”—not “G_ON”. GPS provides Latitude,
Longitude, and current time only.
Note: this photo shows the SmartStar™G hand
controller. The SmartStar
Turn on and wait for controller lights to come on.
For SmartStar™G users (with GPS) wait for controller
to say “G_OK”—not “G_ON”. GPS provides Latitude,
Longitude, and current time only.
Note: this photo shows the SmartStar™G hand
controller. The SmartStar
®
E has the same menu but
with a smaller screen.
Step 8.
Press Menu button.
Go to:
Set up controller. Press ENTER.
Press Menu button.
Go to:
Set up controller. Press ENTER.
Step 9.
Go to:
Set up Local Time (or “Local Time and Site”).
Press ENTER.
Enter date and day-light savings (Y-yes. N-no).
For SmartStar°-E controller a checkmark is “yes”, X is
“no”.
Then press ENTER
Go to:
Set up Local Time (or “Local Time and Site”).
Press ENTER.
Enter date and day-light savings (Y-yes. N-no).
For SmartStar°-E controller a checkmark is “yes”, X is
“no”.
Then press ENTER
(Note: use arrow keys to scroll through screen and select
numbers)
Step 10.
Go to: Set Up Site.
Go to: Set Up Site.
(SmartStar
®
-E users need to enter longitude and latitude for
their city or town –a simple search online will provide this)
Enter time zone:
(add or subtract 60 minutes per time zone)
Enter minutes “behind” UT or “ahead” of UT
• New York City is 300 minutes “behind” UT
• Los Angeles is 480 minutes “behind” UT
• Rome is 60 minutes “ahead” of UT
• Rome is 60 minutes “ahead” of UT
• Sydney is 600 minutes “ahead” of UT