Lenovo m90z 0800 사용자 가이드
2.
Place a soft, clean towel or cloth on the desk or surface. Hold the sides of
your computer and gently lay it down so that the screen is against the surface
and the cover is facing up.
your computer and gently lay it down so that the screen is against the surface
and the cover is facing up.
3.
Remove the computer cover. See “Removing the computer cover” on page 16.
4.
Remove the rear I/O assembly cover from the rear I/O assembly. See
“Removing or reinstalling the rear I/O assembly cover” on page 20.
“Removing or reinstalling the rear I/O assembly cover” on page 20.
5.
Remove the frame stand or lift stand. See “Removing or reinstalling the frame
stand” on page 16 or “Removing or reinstalling the lift stand” on page 17.
stand” on page 16 or “Removing or reinstalling the lift stand” on page 17.
6.
Remove the wall mount cover. See “Removing or reinstalling the wall mount
cover” on page 20.
cover” on page 20.
7.
Disconnect the thermal sensor cable from the system board. See “System
board part and connector locations” on page 13.
board part and connector locations” on page 13.
8.
Remove the four screws 1 that secure the wall mount to the computer main
bracket and then lift the wall mount off the computer main bracket.
bracket and then lift the wall mount off the computer main bracket.
9.
To reinstall the computer wall mount, position the wall mount on the
computer main bracket and align the screw holes in the wall mount with
those in the computer main bracket.
computer main bracket and align the screw holes in the wall mount with
those in the computer main bracket.
10.
Reinstall the four screws to secure the wall mount to the computer main
bracket.
bracket.
11.
Reconnect the thermal sensor cable to the system board. See “System board
part and connector locations” on page 13.
part and connector locations” on page 13.
12.
Reinstall the wall mount cover. See “Removing or reinstalling the wall mount
cover” on page 20.
cover” on page 20.
Figure 11. Removing the computer wall mount
22
User Guide