Targus pa610u 사용자 가이드
Pocket PC Setup
Software Installation
13
8
Plug the LP-E Card into an active Ethernet connection.
HINT: The host PC must be connected and currently logged
into the same network as your Pocket PC.
into the same network as your Pocket PC.
9
Insert the LP-E Card into your Pocket PC’s
CompactFlash I/O card slot.
CompactFlash I/O card slot.
NOTE: For instructions on card insertion, refer to
The following message appears:
10
Tap OK.
When the IP Address screen appears, proceed to
step 5 on page 15 to enter the network settings from
your Network Information Form (on page 11).
step 5 on page 15 to enter the network settings from
your Network Information Form (on page 11).
To enter the network setting at any time, refer to