Targus pa610u 사용자 가이드
Hardware Setup
Connecting an RJ-45 Ethernet Cable
37
The LP-E Card should fit easily into the CompactFlash I/O
card slot. If you encounter resistance, make sure the card is
aligned right-side up. Do not force the card into the slot.
card slot. If you encounter resistance, make sure the card is
aligned right-side up. Do not force the card into the slot.
Connecting an RJ-45 Ethernet Cable
To connect the LP-E Card to your network, plug the
Ethernet adapter module into an active Ethernet port or hub
via an RJ-45 cable (cable not included).
Ethernet adapter module into an active Ethernet port or hub
via an RJ-45 cable (cable not included).
Connecting an RJ-45 cable to the Ethernet adapter module
Removing the LP-E Card
If your computer does not have a card eject button, you can
remove the LP-E Card from its slot by gripping the inner
edge of the black plastic bezel that runs across the end of
the card on either side of the cable connector. The plastic
bezel extends slightly beyond the metal surface on the base
remove the LP-E Card from its slot by gripping the inner
edge of the black plastic bezel that runs across the end of
the card on either side of the cable connector. The plastic
bezel extends slightly beyond the metal surface on the base