Targus pa610u 사용자 가이드
Quick Start
Windows CE
5
1
Connect your mobile computer to a host PC using the
serial cable that came with the device.
serial cable that came with the device.
2
Create an active partnership between your mobile
computer and the host PC.
computer and the host PC.
3
Insert the LP-E Card Installation CD into the host PC.
4
Run
SETUP
from the CD-ROM.
5
When your mobile computer displays the ActiveSync
screen, set your configuration options then tap Finish.
screen, set your configuration options then tap Finish.
NOTE: For instructions on how to configure ActiveSync,
refer to
refer to
6
When the Setup Complete screen appears, tap OK,
then reset your mobile computer to load the new
software.
then reset your mobile computer to load the new
software.
7
Remove the serial cable from your mobile computer,
then plug the LP-E Card into an active Ethernet
connection.
then plug the LP-E Card into an active Ethernet
connection.
8
Insert the LP-E Card into your mobile computer.
NOTE: For instructions on card insertion, refer to
9
When the Targus LP-E Driver message appears, tap
OK.
OK.
10
Use the IP Address screen to configure your network
settings, then tap OK.
settings, then tap OK.