MemoRight 2.5" 128GB SATA SLC GT SSD MR25.2-128S 사용자 설명서
제품 코드
MR25.2-128S
MemoRight NAND Flash-based Solid State Drive
MemoRight Confidential
Page 19
3/6/2009
5 SATA
interface
The drive uses the industry-standard Serial ATA interface that supports 16-bit data transfers. It
supports programmed input/output (PIO) modes 0–4; Ultra DMA modes 0–6. The drive also supports
the use of the IORDY signal to provide reliable high-speed data transfers.
supports programmed input/output (PIO) modes 0–4; Ultra DMA modes 0–6. The drive also supports
the use of the IORDY signal to provide reliable high-speed data transfers.
For detailed information about the Serial ATA interface, refer to the draft of AT Attachment with Packet
Interface Extension (ATA/ATAPI-7), NCITS T13 1410D, subsequently referred to as the Draft ATA-7
Standard.
Interface Extension (ATA/ATAPI-7), NCITS T13 1410D, subsequently referred to as the Draft ATA-7
Standard.
5.1 SATA interface signals and connector pins
The connector on MemoRight SATA NSSD is divided into a signal Segment and a power Segment.
The following tables summarizes the signals on the SATA interface connector. For a detailed
description of these signals, refer to the Draft ATA-7 Standard.
The following tables summarizes the signals on the SATA interface connector. For a detailed
description of these signals, refer to the Draft ATA-7 Standard.
5.1.1 Signal Segment Pin-out Configuration
Pin Configuration
Figure 3. Memoright SATA Connector View
The SATA signal cable uses a protocol transmitted over a 7-pin cable. The following table lists the
signal definitions of the 7-pin segment.
signal definitions of the 7-pin segment.
Table 13:SATA Connector Signal Definitions
Pin
Signal Name
Signal Definitions
S1
Ground
Second Mate
S2
R+
+Differential Receive Signal
S3
R-
-Differential Receive Signal
S4
Ground
Second Mate
S5
T-
-Differential Transmit Signal
S6
T+
+Differential Transmit Signal
S7
Ground
Second Mate
5.1.2 Power Segment Pin-out Configuration
The SATA power connector consists of 15 pins. The following table lists the signal definitions of the