Sony DAR-RD100 사용자 가이드
82
z
Hint
If you forget your password, clear the password and
registered a new password.
Press SET UP to turn on the Setup Display. Enter the six-
digit number 210499 using the number buttons. Select
[
registered a new password.
Press SET UP to turn on the Setup Display. Enter the six-
digit number 210499 using the number buttons. Select
[
OK
] and press ENTER. The registered password is
cleared.
[Parental Control]
Selects the limitation level.
1
Set the AMP/DVD switch to DVD, select
[Parental Control], and press
[Parental Control], and press
,.
The display asks for the password.
2
Enter the four-digit password using the
number buttons and press ENTER.
number buttons and press ENTER.
3
Select the level and press ENTER.
The lower the level, the stricter the limitation.
If you select [No Limit], the Parental Control
function does not activate.
The lower the level, the stricter the limitation.
If you select [No Limit], the Parental Control
function does not activate.
[Area Code]
Selects a code for a geographic area as the
playback limitation level. See “Area Code List”
(page 117).
playback limitation level. See “Area Code List”
(page 117).
1
Set the AMP/DVD switch to DVD, select
[Area Code], and press
[Area Code], and press
,.
2
Enter the four-digit password using the
number buttons and press ENTER.
number buttons and press ENTER.
3
Press
M/m to enter the first character of the
area and press
,.
4
Press
M/m to enter the second character and
press ENTER.
Notes
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
recorder.
recorder.
• Depending on the disc, you may be asked to change the
Parental Control level while playing the disc. In this
case, enter your password, then change the level.
case, enter your password, then change the level.
Recording Settings
The [Rec Setting] Setup allows you to adjust the
recording picture quality and size.
recording picture quality and size.
Select
[Rec Setting] in the Setup Display. To
use the display, see “Using the Setup Displays”
(page 74). The default settings are underlined.
(page 74). The default settings are underlined.
[Rec Mode Set]
Selects one of the following recording modes: HQ
(High Quality), SP (Standard Play), EP (Extended
Play), SLP (Super Long Play).
(High Quality), SP (Standard Play), EP (Extended
Play), SLP (Super Long Play).
[Rec Aspect Ratio] (DVD-RW (VR mode) only)
Selects the picture size of the programme to be
recorded.
When recording on discs other than DVD-RWs
(VR mode), the screen size is fixed to 4:3.
recorded.
When recording on discs other than DVD-RWs
(VR mode), the screen size is fixed to 4:3.
[DV Audio Input]
Selects the stereo track when recording from a
digital video camera connected to the DV IN jack
on the front panel.
digital video camera connected to the DV IN jack
on the front panel.
[Auto Chapter]
Automatically divides a recording (a title) into
chapters by inserting chapter markings at a
specified interval. The markings are inserted while
the recording is being made.
chapters by inserting chapter markings at a
specified interval. The markings are inserted while
the recording is being made.
Level 6
Level 5
Set Password
Parental Control
Parental Control
Area Code
No Limit
Level 8 (Adult)
Level 7
Level 2
Level 1 (Kids)
Level 4
Level 3
[ 4:3 ]
Sets the picture size to 4:3.
[ 16:9 ]
Sets the picture size to 16:9 (wide
mode).
mode).
[ Stereo 1 ]
Records original sound at the time
of shooting. Normally select this
when dubbing a DV/Digital8
format tape.
of shooting. Normally select this
when dubbing a DV/Digital8
format tape.
[ Stereo 2 ]
Records only additional sound
over-dubbed after shooting.
over-dubbed after shooting.
[ Off ]
No chapter mark is inserted.
SLP
Rec Mode Set
Rec Setting
Rec Aspect Ratio
DV Audio Input
HQ
SP
EP
Auto Chapter