Sony SA-NS300 빠른 설정 가이드

Network Speaker 

SA-NS300

Preparations for listening to music 

via your home network

©2011 Sony Corporation      Printed in China

4-193-892-11(2)

Using this network speaker 

on your home network

To enjoy this speaker connected to a network, set up the 

speaker as shown below.

1

  Connecting the speaker  

(network settings)

This section explains the network settings method that requires using 

the supplied CD‑ROM.

2

  Setting up your computer as a server 

This section explains how to set up the Windows Media Player as a 

server (device where stored audio content) to connect this speaker to 

your home network.

When you want to use a server other than Windows Media Player 12 of 

Windows 7 or Windows Media Player 11 of Windows Vista/Windows XP 

as your server, access the web site written on the back side of this flyer.

3

  Listening to audio content stored on a server

1

  Connecting the speaker 

(network settings)

Your Windows PC must be connected to a wireless LAN router/access 

point in advance.

You will be required to select or enter the following information when 

you make the network settings.

Check the following information in advance and record them in the 

space provided below.

* This information should be available from a label on your wireless LAN router/

access point, from the operating manual, from the person who set up your 
wireless network, or from the information provided by your Internet service 
provider.



 Insert the supplied CD-ROM into the CD-ROM drive of 

your PC.

CD‑ROM

Note

 If the “Starting the wireless connection setup” screen does not appear 

automatically, display the screen following the on‑screen instructions.



 Select the desired language, select [I accept the license 

agreements for this product] after reading the software 

license agreement carefully, then click [Next].

Note

 If you have not made the Windows firewall settings, make the UPnP settings 

following the on‑screen instructions.



 Connect the speaker and the wireless LAN router/access 

point using the supplied LAN cable following the 

on-screen instructions, then turn on the speaker.

Connect a LAN cable to LAN port.



 Click [Next].

The access point list appears. This may take a while.



 Select the desired access point, then click [Next].

The security key (WEP, WPA/WPA2 key) input screen appears.

Note

 The security key (WEP, WPA/WPA2 key) input screen does not appear when 

you select an unencrypted access point.



 Enter the security key (WEP, WPA/WPA2 key), then click 

[OK].

The speaker starts to attempt a connection to the selected access 

point. This may take a while.



 Disconnect the supplied LAN cable, then click [Next].

The LINK indicator lights up in green when the connection is 

made.

The network settings for the speaker have been completed.

Refer to steps 8 and 9, or the back side of this flyer for instructions 

on how to set up the DLNA settings.



 Click [Open the procedure for DLNA settings].

The web site opens.



 Configure the environment required to use your 

DLNA-compliant devices referring to the web site, or 

after reading the instructions on the back side of this 

flyer.

About network set-up

Wireless networks

Set up the network referring to step 1 in this flyer.

WPS compliant wireless networks 

Refer to “Setting Up Wireless Networks Using an Access Point 

Compliant with WPS” in the supplied operating instructions. 

Tip

 You can also set up a WPS compliant wireless network referring to step 1 in 

this flyer.

Wired networks

Refer to the supplied operating instructions.

Tip

 Problems such as sound interruption may occur, depending on the 

environment of your wireless network.

  You can solve these problems by using a wired network.

If you have trouble setting up your 

network

 Refer to “Troubleshooting” in the supplied operating instructions. 

 Access the following customer support site.

  http://www.sony.net/audio/netsettings