Uniden BC95XLT 사용자 가이드
25
Setting Up Your Scanner
The Belt Clip
To make your scanner easier to carry when you are
on the go, we provide a factory attached belt clip.
Use a Phillips screwdriver to remove the mounting
screws and the clip from the scanner if desired.
on the go, we provide a factory attached belt clip.
Use a Phillips screwdriver to remove the mounting
screws and the clip from the scanner if desired.
Connecting to a PC
You can connect your scanner to a PC using an
optional serial cable and software available from
www.uniden.com. Plug the small end of the cable
into the BC95XLT serial port (see above). Plug the
other end into your PC's serial port. If your PC has
only USB ports, use the optional USB-1 cable (also
available from www.uniden.com) to connect the
scanner to your computer. See page 59 for cable
details.
optional serial cable and software available from
www.uniden.com. Plug the small end of the cable
into the BC95XLT serial port (see above). Plug the
other end into your PC's serial port. If your PC has
only USB ports, use the optional USB-1 cable (also
available from www.uniden.com) to connect the
scanner to your computer. See page 59 for cable
details.
When the scanner is correctly connected to your
PC, the software tells the scanner to go into pro-
gramming mode displaying Prog on the LCD. The
PC, the software tells the scanner to go into pro-
gramming mode displaying Prog on the LCD. The
icon flashes.
Then, only the
key and the key are enabled.
Remote
Serial Port
Beneath Cover
Belt Clip
Mounting Screws
BC95XLT English 082806.fm Page 25 Monday, August 28, 2006 3:51 PM