Uniden elx500 사용자 매뉴얼
–
3
–
Installing Your Expansion Handset
Follow these three easy steps to get your new handset ready to use:
1
Install the battery pack.
2
Connect the charger and charge your new handset for 10 hours.
3
Register your new handset to the main base.
Step 1: Install the Battery Pack
1
Press down on the handset battery
case cover (use the finger indention
for a better grip) and slide the cover
downward to remove.
case cover (use the finger indention
for a better grip) and slide the cover
downward to remove.
2
Place the battery pack in the
battery compartment with the
connectors on the battery and on
the compartment aligned.
battery compartment with the
connectors on the battery and on
the compartment aligned.
3
Place the battery case cover back on
the handset and slide it upwards
until it clicks into place.
the handset and slide it upwards
until it clicks into place.
• Use only the Uniden battery
(BT-0002) supplied with
your phone.
Replacement batteries are
also available through the
Uniden Parts Department.
(See page 2.)
your phone.
Replacement batteries are
also available through the
Uniden Parts Department.
(See page 2.)
• Recharge your handset on a
regular basis by returning
the handset to the charger
after each phone call.
the handset to the charger
after each phone call.
Rechargeable Lithium Ion Batteries
Must Be Recycled or Disposed of Properly
Must Be Recycled or Disposed of Properly
UU891BH(ELX500) OM.fm Page 3 Monday, September 5, 2005 11:56 AM