Uniden pcd1000 사용자 가이드

When you travel, your PCD1000 has several advanced
functions that can put your cellular phone in service, or
eliminate unnecessary long distance or ROAM charges.
These functions are:

2 NAM (Number Assignment Module) Selections.
System Selection
SID (System Identification) Selection
SID Inhibit

See your Uniden Dealer for more explanation of, and
assistance with these functions.

To access any of these functions, see page 17.

If you regularly travel between two different cities, you can
have a different telephone number (NAM) assigned to
each location. If

is displayed, and you are in one of

your NAM locations, then you need to select the proper
NAM (NAM 1 orthrough NAM 2).

When you are traveling, you may need to change your
A/B System so you can eliminate the

indicator. You may also need to select a different System
whenever you change the telephone number or select the
programmed

. Some Systems are “wireline”

(conventional telephone network), and some are
“non-wireline”. Ask your service provider for more
information about these Systems.

The various Modes are:

Before changing your System, check and record the
present System setting.

If you see

on the display for more than a few

seconds, the phone is in an area that will not support
operation in the selected Mode. You must then choose
another.

Modes

and

are used when you travel in

areas other than your home area and the cellular
coverage is strong wherever you go. If the cellular phone
is out of the service provider’s cellular coverage,

is displayed. If you are in a System area opposite

to your Home System,

is displayed.

is used within your Home Area. It is the System

you are authorized on. When you are out of your Home
Area,

is displayed.

and

are used when you travel in areas

where cellular coverage is weak or split into several
System types. This allows you to avoid switching back