UsGlobalSat bc-307 사용자 가이드
Plug the external antenna with MMCX connector to the plug on BC-307. Place the
magnetic external antenna on the roof of the car or an outdoor open-space, and make sure
place it in correct direction. That is, the side with magnetic is the bottom side, and the upper
side must face to sky in order to receive better signal.
magnetic external antenna on the roof of the car or an outdoor open-space, and make sure
place it in correct direction. That is, the side with magnetic is the bottom side, and the upper
side must face to sky in order to receive better signal.
Notice:
Hold the antenna connector while you plug the external antenna into the BC-307 or
unplug the external antenna from the BC-307. Do not pull the cable line.
Hold the antenna connector while you plug the external antenna into the BC-307 or
unplug the external antenna from the BC-307. Do not pull the cable line.
2. Installation
The BC-307 GPS supports plug and play.
For PDA:
1. Plug in BC-307 GPS into your PDA equipped with Compact Flash interface.
2. Running the suitable mapping/navigation software and select the correct COM port &
For PDA:
1. Plug in BC-307 GPS into your PDA equipped with Compact Flash interface.
2. Running the suitable mapping/navigation software and select the correct COM port &
baud rate: 4800,N,8,1.
Usually the COM port is COM2 which depends on the PDA type.
User can use the testing program provided with the package to detect the COM port that
the BC-307 is using.
User can use the testing program provided with the package to detect the COM port that
the BC-307 is using.