Utstar cdm8945 사용자 설명서

다운로드
페이지 75
C
H
1
13
C
H
1
12
BATTERY USAGE
BATTERY HANDLING INFORMATION
• When you charge the battery with the phone power off, you 
will see a charging status screen. You cannot operate the 
phone until it is powered on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset
powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace
the battery.
1
Plug the AC Charger into a standard outlet.
2
Plug the other end of the AC Charger into the
bottom of your phone. The battery must be
installed onto the phone.
BATTERY CHARGING
POWER CONNECTION
l
Only use the battery and charger approved by the
manufacturer.
l
Only use the battery for its original purpose.
l
Try to keep batteries in a temperature between 
41ºF (5ºC ) and 95ºF (35ºC).
l
If the battery is stored in temperatures above or
below the recommended range, give it time to warm
up or cool down before using.
l
Completely drain the battery before recharging. 
It may take one to four days to completely drain.
l
Store the discharged battery in a cool, dark, and dry 
place.
l
Purchase a new battery when its operating time
gradually decreases after fully charging.
l
Properly dispose of the battery according to local
laws.
l
Don’t attempt to disassemble the battery – 
it is a sealed unit with no serviceable parts.
l
Don’t accidentally short circuit the battery by
carrying it in your pocket or purse with other
metallic objects such as coins, clips and pens. 
This may critically damage the battery.
l
Don’t leave the battery in hot or cold temps. 
Otherwise, it could significantly reduce the capacity
and lifetime of the battery.
l
Don’t dispose of the battery into a fire.
DOs
DON’Ts