Utstar gprs1229 사용자 설명서

12

 

 

4. Inserting the SIM card 
Insert the SIM card into the SIM card socket. Make sure that the notched corner is at the 
top right and the golden contact area on the card is facing downward. 

 

5. Reinstalling the battery. 
Place the battery so that the tabs on its end align to the slots at the top of the phone. Press 
the battery until it clicks into place. Make sure that the battery is properly installed before 
switching the phone on. 

 

1. To turn on the phone, press and hold Red key/Hang-up key. You will have to enter a 
PIN code. A PIN code is a 4- to 8-digit secret code for your SIM card. It is preconfigured 
and communicated to you by your operator or retailer. If you enter an incorrect PIN code 
three times, your SIM card will be blocked. To unblock it, you must request the PUK code 
from your operator. When you switch on your mobile phone with your new SIM for the first 
time, you will be asked for the following: 

[Set date] 

To set the current date 

[Set time] 

To set the current time 

[Copy SIM names into the phone] 

If your phone detects any names and 
telephone numbers in the SIM card 
phonebook, you will be asked if you want to 
copy them into the on board phone book. If 
you wish to copy the numbers, press OK, 
otherwise press Cancel. 

2. Welcome 

The following appears when the phone is turned on: