Iomega 34389 빠른 설정 가이드

Quick Install–USB or FireWire

1. Connect the included power supply to the back of the

drive and to a power outlet.

CAUTION! Do not move the drive while it is powered up

to avoid drive damage or data loss.

2. Identify the appropriate cable and connect it to the

back of the drive. For a USB connection, connect the
USB cable to the DuoLink port (marked with both
the USB symbol

and ‘eSATA’). For a FireWire

connection, you can use any FireWire port.

NOTE: Never connect the drive to the computer with

more than one cable.

3. Connect the other end of the cable to the port on your

computer. Turn the drive on.

Mac Users: The drive should mount and appear on the

Mac Desktop.

PC Users: Your computer will not recognize the drive

until it is reformatted. See instructions below.

Formatting the Drive for Windows

CAUTION! Reformatting the drive will erase all existing data!

1. Open Windows Disk Management (right click on

My Computer, select Manage, and click on Disk
Management).

2. If the Disk Wizard opens, click Next. Select the disk,

click Next, then Finish.

If the Wizard does not open, locate the drive in the

lower list. Look for a disk that does not show a drive
letter or file system. Right click on the drive name and
select Initialize Disk (Windows XP) or Write Signature
(Windows 2000), then OK.

3. The drive will now appear as Unallocated and the

bar will be black. Right click on the black bar and
select New Partition (Windows XP) or Create Partition
(Windows 2000).

4. When the Partition Wizard opens, click Next at each

screen to select the default options and format the
drive NTFS.

NOTE: If you want to use the drive cross-platform, you can
use Mac OS X Disk Uitlity or the Iomega FAT32 Formatter to
change the format to FAT32. Visit the support area on
www.iomega.com for detailed instructions.

Quick Install–eSATA

1. If you are connecting to an eSATA PCI card, make sure

the drivers for the card have been installed and the
card is properly recognized by your operating system.

NOTE: You do not need to install special drivers for the
Iomega UltraMax drive. It is supported by the drivers
included with the eSATA PCI card. If you are using a
built-in eSATA connection, the drive is supported by
native drivers in the operating system.

2. Shut down the computer.

NOTE: The eSATA interface is NOT plug-and-play.

Always shut down the computer before connecting or
disconnecting the drive.

3. Connect the included power supply to the back of the

drive and to a power outlet.

CAUTION! Do not move the drive while it is powered up

to avoid drive damage or data loss.

4. Identify the eSATA cable and connect it to the DuoLink

port (marked with both the USB symbol

and

‘eSATA’).

NOTE: Never connect the drive to the computer with

more than one cable.

5. Connect the other end of the cable to your eSATA PCI

card or built-in eSATA connection.

6. Turn on the power switch on the back of the drive and

restart your computer.

Mac Users: The drive should mount and appear on the

Mac Desktop.

PC Users: Your computer will not recognize the drive

until it is reformatted. See instructions to the left on
Formatting the Drive for Windows.

FireWire/1394/i.Link

USB

eSATA

SAT