Utstar xv6800 사용자 가이드
Experiencing Multimedia 117
•
Flicker Adjustment. When taking indoor shots, flicker on the camera screen may be caused by
inconsistencies between the vertical scan rate of the camera display and the flicker frequency of
fluorescent lighting. To reduce flicker, you can change the flicker adjustment setting to the proper
frequency (50Hz or 60Hz) of the country where your device is being used.
inconsistencies between the vertical scan rate of the camera display and the flicker frequency of
fluorescent lighting. To reduce flicker, you can change the flicker adjustment setting to the proper
frequency (50Hz or 60Hz) of the country where your device is being used.
•
Record with Audio. Select On to record audio with the captured video clips. This is selected by default.
If you select Off and then capture a video clip, it will have no audio.
If you select Off and then capture a video clip, it will have no audio.
•
Prefix. Specify how to name captured images and video clips. When Default is selected, the file name
of each new captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for example:
IMAGE_001.jpg. You may also choose to name files using either the current Date or Date & Time as the
prefix.
of each new captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for example:
IMAGE_001.jpg. You may also choose to name files using either the current Date or Date & Time as the
prefix.
•
Counter. By default, the newly captured image or video files are named with a prefix and some
sequential numbers, such as 001, 002, and so on. To reset the numbering to “001” for your captured files,
tap Reset.
sequential numbers, such as 001, 002, and so on. To reset the numbering to “001” for your captured files,
tap Reset.
•
Recording Limit. Specify the maximum time or file size for recording.
•
Template Folder (in Picture Theme mode only). By default, templates are stored in the \My Documents\
Templates folder on the device’s Main Memory. If you transferred some templates to a storage card
(via File Explorer), set this option to Main + Card to specify that templates are located in both the main
memory and the storage card.
Templates folder on the device’s Main Memory. If you transferred some templates to a storage card
(via File Explorer), set this option to Main + Card to specify that templates are located in both the main
memory and the storage card.
•
Adjust. This option allows you to adjust the camera display properties, such as Contrast, Saturation,
Hue, and Sharpness.
2
1
3
4
5
1
In the submenu, tap one of the properties to adjust.
Alternatively, press NAVIGATION up or down to select a property.
Alternatively, press NAVIGATION up or down to select a property.
2
To increase/decrease the value, tap the plus/minus icon or press NAVIGATION left or right.
The live Camera screen on the background immediately displays the effect of changes.
The live Camera screen on the background immediately displays the effect of changes.
3
Tap to save the settings and close the submenu.
4
Tap to reset all properties to their default.
5
Tap to close the submenu without applying and saving the changes.